Electroplating with abrasive honing the bore wall after cutting the workpiece to form three phases

Details are as follows: analysis of the electroplated CBN honing finishing with a small hole in the hinge mechanism and Heng Heng with the force. Contrast reaming, honing and grinding, honing with abrasive cutting plating workpiece bore wall after a swipe, farming  polycrystalline diamond chip formation in three stages. Honing tool by the tangential force, the normal force and the axial force, the tangential forces are the main cutting force, with a rotation of the honing of the inner hole wall friction, because a pair of fixed handle couple; the normal force is within the hole wall  synthetic diamond  on the honing tool, ultimately offset; axial force generated by the cutting part of the main angle; produce chips based on the conditions of the axial force must meet certain numerical requirements, but the axial force is the force deformation thus honing tool affected.