Wells abrasive jet cutting seam, sew the body fluid in the flow

Abrasive jet cutting seam technology is developed in an eighty year-end for releasing pollution and expand the near-wellbore permeability reservoir permeability of the new technology , with a penetration depth , no secondary pollution, the discharge area, the effect is significant construction and so on. But there are still many problems with the air compared to the free water jet , underwater jet  synthetic diamond  is also less . Especially for submerged conditions, high-speed non-free two -phase jet theory needs further study. The abrasive jet wells slotted body fluid flow at the seam , the movement of the solid particles ,  synthetic diamond powder  changes with time , the second return and the jet of fluid as the direction along the kerf attenuation rate few studies . To solve the above problems , this paper uses a theoretical and numerical investigation of the combination of research methods. The use of two -phase jet theory and   Diamond blade fluid dynamics and other basic knowledge , analysis wells abrasive jet slotting two-phase fluid motion mechanism . Gambit pre-processing software application , based on test results to establish the ground and underground seam 2D and 3D model of the body . Based on FLUENT software carried out on the two-dimensional numerical simulation of abrasive jet slotting process provides a theoretical basis and experimental evidence .