Including shaping and sharpening wheel dressing

Included in the shaping and sharpening wheel dressing before, to ensure spindle bearings in a certain temperature is very important. This prevents damage to the part geometry and wheel dressing tools and non-normal wear and tear. For the dressing with the tools must be handled carefully because it is generally hard, wear-resistant diamond but very brittle material, and due to a minor collision, the force caused by tiny cracks and broken are very sensitive.
Because  Synthetic diamond  is itself a tool, to be kept very sharp. Use a blunt tool to trim the dressing wheel surface, will make wheel blunt. In order to maintain a high quality and sharp diamond dressing tools, at regular intervals, you need 1/8 enclosure  cutting tools  point or dressing tool with a conical tip. According to trim the number of rotations decide, based on  grinding wheel , at least once every rotation. For the chisel head and molding dressing tools, which normally takes before they blunt 180 ° to rotate once. Most of the parts and cylindrical grinding wheel is placed in a horizontal line. The highest point of the cylindrical part and the highest point is called cylindrical grinding wheel parts / wheel contact point diamond dressing tools should be placed as close to the part / wheel contact point wheel dressing. For internal grinder with grinding wheels, diamond dressing tools will be close to the highest point of cylindrical grinding wheel (ie grinding holes Parts / wheel contact point) to be trimmed, which is more important.