Reduce vibration and avoid wheel trim marks left on the surface

Dressing the wheel, the effectively reduce vibration and avoid dressing the wheel marks left on the surface, collision and damage dressing tools, is critical. This means that the wheel  polycrystalline diamond  be maintained, which is the structural characteristics of the wheel. Determined. Density unevenness and the quality of the wheel geometry, will affect the inherent balance of a grinding wheel. Therefore, a high-quality grinding wheel selection is very important. If it is a high quality wheel, just proper installation that is able to maintain a good balance wheel. The factory in accordance with the manufacturer's instructions  abrasive grinding , grinding wheel is marked with an up arrow, which indicates that the coarse grinding wheel  Synthetic diamond  after the end position. The user can then noted in arrows, note wheel dressing to reach homeostasis. Coolant filling evenly, and sometimes can also help to maintain a balance wheel.
In order to prevent vibration as much as possible, the operator must make the dressing tool firmly clamped in the clamp seat and leave the minimum amount of overhang, the only way to make the dressing tool strong enough rigidity. If the diamond dressing tool clamping process is not strong, it will inevitably cause vibration, resulting in serious noise, so that parts of the surface to produce tiny ripples, causing parts of the surface strain and dressing tools cause some damage.